News

How to deal with bad heat dissipation caused by the failure of thermostat in TMR feed mixer

How to deal with bad heat dissipation caused by the failure of thermostat in TMR feed mixer

The thermostat is faulty, resulting in poor heat dissipation. The thermostat is located in the outlet of the engine, its function is to adjust the cooling intensity, when the diesel engine just started the body temperature is low, effectively cut off the large circulation waterway automatically connected to the small circulation waterway, reduce the heat dissipation so that the diesel engine temperature rises quickly

Application scenario of fertilizer spreader

Application scenario of fertilizer spreader

The production of high-quality agricultural products need high-quality organic fertilizer​ to improve the soil, fertilizer truck, the whole process of manipulating the fertilizer chain and after throwing fertilizer spiral, in the fertilizer process, the crushing edge will be crushed fertilizer, make the fertilizer more uniform fine, but also improve the flying effect. In practice, mechanical methods can be used to adjust the leaves and roots of crops, by changing the degree of fermentation and the contents of trace elements such as sulfur, phosphorus and potassium, improve the watering temperature

TMR feed mixer cooling system scale too much how to deal with?

TMR feed mixer cooling system scale too much how to deal with?

TMR feed mixer adds the materials to be mixed through the lower feed port, and the lifting screw inside the feed mixer sends the mixing materials from the feed hopper of the stand mixer into the vertical screw conveyor. After it is lifted upward to the top, it is then thrown in the umbrella shape to fall around the mixing cylinder and re-enter the vertical screw conveyor through the gap at the bottom of the sleeve, and then lifted upward again. In this way, stir and mix until the mixture is uniform. Then open the discharge port and unload the material.

How to use the fertilizer truck to save time and effort

How to use the fertilizer truck to save time and effort

The production of high-quality agricultural products requires high-quality organic fertilizers to improve the soil, and the application of organic fertilizers ​is a strong physical labor, operators in the summer of more than 40 degrees in the greenhouse sultry fertilizer, seriously affecting the health and efficiency of the operation. The new fertilizer spreading car can operate the whole process of feeding chain and after throwing fertilizer screw. In the process of spreading fertilizer, the crushing edge will destroy the fertilizer, so that the fertilizer is more uniform and fine, but also forward flying effect.